User's Manual
Table Of Contents
- 1.0 Absolute Maximum Ratings
- 2.0 Normal Operating Conditions
- 3.0 Electrical Specifications
- 4.0 Radio
- 5.0 Pinout
- 6.0 Mote Boot Up
- 7.0 Interfaces
- 7.1 Status LED Signal
- 7.2 Discrete Input/Output (I/O)
- 7.3 Deep Sleep
- 7.4 Serial Interface
- 7.4.1 Serial Flow Control
- 7.4.2 Mote Command Data Types
- 7.4.3 Mote Commands
- 7.4.3.1 Command 0x80 Serial Payload Sent to Mote Serial
- 7.4.3.2 Command 0x81 Unacknowledged Serial Payload Received from Mote Serial
- 7.4.3.3 Command 0x82 Acknowledged Serial Payload Received from Mote Serial
- 7.4.3.4 Command 0x84 Time/State Packet
- 7.4.3.5 Commands 0x87 and 0x88 Set Parameter Request/Response
- 7.4.3.6 Commands 0x89 and 0x8A Get Parameter Request/Response
- 7.4.3.7 Command 0x8C Mote Information
- 7.4.3.8 Command 0x8D Reset Mote
- 7.4.4 Mote Get/Set Command Parameters
- 7.4.5 HDLC Packet Processing Examples
- 8.0 Packaging Description
- 9.0 Regulatory and Standards Compliance
- 10.0 Ordering Information
-
M1030-2 MOTE DATASHEET DUST NETWORKS™ 3
9.2.3 OEM Labeling Requirements ....................................................................26
9.3 Industrial Environment Operation.......................................................................26
10.0 Ordering Information............................................................................................27