Operation Manual
7
Changing the batteries
Setting Real Time Clock
Ensure +/- terminals are the correct way round.
1. When the batteries are inserted, TIME will enter automatically. “TM” will
ash during the TIME setting mode. Otherwise, press and hold SET key for 2
seconds to enter TIME setting under clock mode.
2. Press HRS key to adjust the hour gure.
3. Press MIN key to adjust the minute gure
4. Press SET key once to make the nal conrmation and “TM” stops ashing.
5. The display will only show in the setting mode for 20 seconds if there is no
operation.
24 hr display format will be shown only when g unit is selected
12 hr display format will be shown only when lb unit is selected