User`s manual

53
COM ports (Serial Ports)
Values Meaning
Auto The bios will automatically use serial ports.
Disabled
If you do not need the serial port in question, set this item to
disabled.
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
Onboard
serial port 1 /
2
2E8/IRQ3
Set an IO address and an IRQ to be used by serial ports.
IR Control
Values Meaning
Normal
IrDA Allows use of the IR port in IrDA mode.
ASKIR Allows use of the IR port in ASKIR mode.
UART Mode
Select
SCR Allows use of the IR port in SCR mode.
Half Select if your IR device supports Half duplex only.
UR2 Duplex
Mode
Full For IR devices that support full duplex.
Paraller Port (Printer Port)
Values Meaning
Disabled Disables use of the parallel port.
3BC/ IRQ7
378/ IRQ7
Onboard
Parallel Port
278/ IRQ5
Select and IO Address and an IRQ to be used by the parallel
port.
SPP Enableds use of SPP devices.
EPP Enables use of EPP devices.
ECP Enables use of EPP devices.
Parallel Port
Mode
ECP+EPP Enables use of ECP + EPP devices.
ECP mode
use DMA
1 or 3
Select either DMA channel 1 or 3 (This is only relevant if ECP
was selected above). Default is channel 3.