User`s manual

41
Boot Devices
The first to third boot device items allow you to select what device the system should boot
from. If the BIOS fails to boot from the first boot device, it will attempt to boot from the
second boot device, if that fails too, the third boot device is tried. If you set the boot other
device item to enabled, the BIOS will try to boot from other devices if the first to third
choices all fail. If you set this item to disabled, the BIOS will not boot if the first to third
devices all fail to boot.
Values Meaning
Floppy
The system attempt to boot from diskette.
(first boot device default)
HDD 0
The system will attempt to boot from the first HDD.
(Second boot device default)
SCSI
The system will attempt to boot from the first device attached to
the first SCSI interface.
CD-ROM The system will attempt to boot from the first CD-ROM found.
HDD1 The system will attempt to boot from the second HDD.
HDD2 The system will attempt to boot from the third HDD.
HDD3 The system will attempt to boot from the fourth HDD.
ZIP100 The system will attempt to boot from an attached ZIP 100 drive
First ~ Third
boot device
Disabled This disables booting from this device.
Keyboard Typematic Rate and Delay Settings
If you set the typematic rate setting item to disabled, the system will use the defaults of 6
and 250 for the rate and delay items. If you set it to enabled you can select the values
yourself. Refer to the table below:
Values Meaning
Typematic
Rate
6 ~ 30
This value sets the amount of time a character is repeated per
second if it is kept down on the keyboard. Choose from the
following values: 6, 8, 10, 12, 15, 20, 24, 30.
Typematic
Delay
250 ~ 1000
This value sets the amount of time in ms before a character
starts repeating after it was pressed on the keyboard. Choose
from 250, 500, 750 and 1000 ms.
Security Option
The security option item allows you to select when the password needs to be entered. Refer
to the table below:
Values Meaning