Replacement Part List

24
Storage and Transportation
CAUTION: Never place any type of storage cover on the generator while
it is still hot.
When transporting your generator:
 Empty the gas tank (see "Emptying the Gas Tank" in the "Maintenance" section).
 Disconnect the spark plug.
 Do not obstruct any ventilation openings.
 Keep the generator in a cool dry area.
When storing your generator:
If you plan on starting the unit again the same day:
1. Turn off the main breaker.
2. Allow the unit to run 3 - 5 minutes.
3. Turn off the key.
4. Store.
If you plan on starting the unit again within 30 days:
1. Turn off the main breaker.
2. Allow the unit to run 3 - 5 minutes.
3. Turn off the fuel valve.
4. Allow the unit to stall out.
5. Turn off the key.
6. Add fuel stabilizer to the gas remaining in the tank.
7. Store.
If you do not plan to start the unit for longer than 30 days:
1. Turn off the main breaker.
2. Allow the unit to run 3 - 5 minutes.
3. Turn off the fuel valve.
4. Allow the unit to stall out.
5. Turn off the key.
6. Drain the fuel tank (See "Emptying the Gas Tank" in the "Maintenance" section)
7. Drain the carburetor
a. Remove the drain bolt from the carburetor.
b. Drain the small amount of remaining fuel from the carburetor bowl.
8. Oil the cylinder
a. Remove the spark plug.
b. Put 2 tbsp. of 10w30 motor oil directly into the spark plug hole
c. Pull the recoil start one time.
d. Replace the plug.
9. Remove the battery and place on tender indoors.