Operating Guide

CAUTION: The DC receptacle is for recharging 12 Volt automotive-type batteries

only. Do not connect any other device to this receptacle.

CAUTION: Never try to jump start a car with your generator.

USING THE GENERATOR (CONTINUED)

DC Usage

Connect the battery

Connect positive receptacle

Start Generator

Connect one charging wire to the positive terminal on the

battery and the other charging wire to the negative terminal

on the battery.

Connect the free end of the positive wire to the positive

receptacle (outlet) on the generator.

The key switch is located on the left side of the front power

panel. Insert the key and turn to the start position to start

the generator. Allow the key to return to the run position

once started.