Replacement Part List

-20 20 40 60 800 100 F

-30-40 -10 0 10 20

-20

40 C

10W-30

ENVIRONMENTAL TEMPERATURE

5W-30

SAE

GENERATOR SETUP (CONTINUED)

Add oil

The generator requires engine oil to operate properly. The generator, when new from the package

contains no oil in the crankcase

. You must add the proper amount of oil before operating the

generator for the rst time. This amount is equal to the oil capacity of the engine crankcase:

WARNING: Do not apply engine oils with additives or 2-stroke gasoline engine oils. They don’t

have enough lubrication, and may shorten the engine’s service life.

a. Make sure the generator is on a level surface.

b. Unscrew the oil ller/dipstick cap from the engine .

c. Using a funnel, add the appropriate amount of oil

into the crankcase. You will know the crankcase is

full when the oil level has reached the lower lip of

the opening you have just poured the oil into.

d. Replace oil ller cap.

Step 3 - Adding Oil

Engine oil recommended: SAE 10W-30. Viscosity varies with

regions and temperatures. Choose your oil viscosity using the

chart to the left.

* A small amount of oil from factory testing may be present on

arrival.

Model Number XP5500E

Engine Oil Capacity 20 . oz (0.6L)

WARNING: DO NOT overll the crankcase. This

may damage the motor and shorting overall life

of your generator.