Replacement Part List

ENGINE SETUP
Add oil
The engine requires engine oil to operate properly. The engine, when new from the package
contains no oil in the crankcase
*
. You must add the proper amount of oil before operating the
engine for the rst time. This amount is equal to the oil capacity of the engine crankcase:
a. Make sure the engine is on a level surface.
b. Unscrew the oil ller cap from the engine .
c. Using a funnel, add the appropriate amount of oil
into the crankcase. You can check the oil level of the
engine with the dipstick located below the oil
ller cap. Simply pull the dipstick out and the
indicated oil level is on the end of the stick.
d. Replace oil ller cap.
1.
Step 1- Adding Oil
Model Number XP20HPE
Engine Oil Capacity 40.5 . oz (1.2 L)
WARNING: DO NOT overll the crankcase. This
may damage the motor and shorting overall life
of your engine.
17
Engine oil recommended: SAE 10W-30.
Viscosity varies with regions and temperatures. Choose your
oil viscosity using the chart to the left.
* A small amount of oil from factory testing may be present on
arrival.
* Synthetic oil may be used after the 8 hour initial break-in
period. Using synthetic oil does not increase the recommended
oil change interval. Full synthetic 5W-30 oil will aid in starting in
cold temperatures <5ºC (41ºF).
WARNING: Do not apply engine oils with additives or 2-stroke gasoline engine oils;
they don’t have enough lubrication and may shorten the engine’s service life.