Replacement Part List

21
MAINTENANCE
Air Filter
 To clean, remove the screws then remove outer casing.

 Remove the foam element.
 Wash the foam element in solvent and let dry.
 Pour a small amount of oil on the foam element then squeeze out, but do not
wring out, excess oil. Foam element should be damp, but not dripping.

Do not run the generator without reinstalling the foam element or excessive piston and
cylinder wear may result.
CAUTION!

 Remove screws, then remove the muffler cover as shown.
 .




 Install the outer casing and tighten the screws.

 Allow hot components to cool before touching.
WARNING!
Avoid contacting hot areas of this unit.
OIL
Check the muffler screen and spark for damage.If damaged replace with DuroMax replacement parts
Checking Muffler and Spark Arrestor
Loosen bolt, then remove muffler cap, muffler screen, and spark.
Check the muffler screen and spark for carbon deposits. Remove carbon deposits with a wire brush.
Install the spark. Align the spark projection with the hole in the muffler pipe.