Replacement Part List

TRANSPORT, STORAGE, AND REMOVAL FROM STORAGE

I. TRANSPORT

Transport with the fuel valve turned off. Always let

the engine cool completely before transporting.

II. STORAGE

If the engine is stored for an extended period, be

sure to store it properly.

1. Drain the Gasoline from the carburetor and fuel valve.

2. Remove the spark plug. Pour 1 tbsp. of fresh engine oil through the spark plug hole into the

cylinder. Pull the recoil rope to rotate the engine and distribute engine oil evenly, and re-install

the spark plug.

3. Pull the starting rope slowly until you feel a slight resistance. Align the arrow of the pulley

cup with the hole in the starter. This will close both valves to avoid moisture in the cylinder.

4. Store the engine covered in a clean dry garage or shed..

Align the arrow on the

pulley cup with the hole in

the starter.

Carb.

Drain Plug

CAUTION

To avoid fuel spins do not lean

the engine when filling. Spilled

fuel or fuel vapor may ignite

and cause fire.

Fuel Valve

Drain Plug