Replacement Part List

SERVICING YOUR GENERATOR

2. Clean the sediment cup in nonflammable solvent, and dry them thoroughly.

3. Install the n ew O-ring and sediment cup, and tighten the sediment cup securely.

4. Make sure there i s no fuel leakage.

SPARK PLUG SER VICE

Recommended spark plugs: F7TC

NOTICE

An incorre ct spark plu g ca n cau se engine damage.

If the engine is hot, allow it to cool before servicing the spark p lug.

1. Disconnect t he spa rk plug caps, and remove any dirt from around th e spark p lug area.

Remove the spark plugs with a 180mm spark plug wrench

(comm er c ially a

vailable).

3. Inspect the spark plugs. Replace them if the electrodes are worn or if the insulator

is cracked, ch ipped, or fouled.

4. Measure th e spa rk plug electrode gap with a wire type feeler gauge. Cor rect the gap, if necessary, by carefully

bending th e side electro de.

The gap should be: 0.7 -- 0.8mm

5. Make sure that the spark plug sealing washers are in good condition, an d th read the spark plug in by hand tprevent

cross threading.

6. After the spark plugs seat, tighten with a 21mmsparkplugwrenchto compress the washer.

If reinstalling a us ed spark plug, tighten 1/ 81/4 turn after the spa rk plug seats.

If installing a n ew spark p lu g, tighten 1/2 turn after the spark plug s ea ts.

0.7 - 0.8mm