Replacement Part List

SERVICING YOUR GENERATOR

NOTICE

Operating the engine without a n air filter, or with a damaged air filter, will allow dirt to enter the eng ine, causing ra pid

engine wear.

FOAM AIR FILTER CLEANING

A d irty foam a ir filter will restrict air flow to the carburetor, reducing engine performance. If you op erate the generator

in very dusty areas, c lea n the foam air f ilter more frequently than specif ied in the Main tenance Schedule.

1. Clean the foam air f ilter in w arm soapy water, rinse, and allow t o dry thoroughly, or clean in non-flammable sol vent

and allow t o dry.

2. Dip th e foam air filter in clean engine oil, then squeeze ou t all excess oil. The engine will smoke when started if too

much oil is left in th e foam a ir filter.

SEDIMENT CUP CLEANING

1. Turn the fuel valve lever to the OFF position, then remove the Sedim ent cu p an d the O- ring. Discard the O-ring.

Wipe dirt from the air cleaner housing and cover using a moist rag. Be careful to prevent dirt from entering the air

duct that leads to the carburetor.