Replacement Part List

CONTROLS & FEATURES
FEATURES
Oil Alert System
The Oil Alert system is designed to p revent engine damage caused by an insufficient amount of oil in th e
crankcase. Before the oil level in the crankcase can fall below a safe limit, the Oil Alert system will automatica lly stop th e
engine
(the engi ne switch will remain in the O N p ositio n).
If the engine stops and will not restart, chec k the engine oil level (see Page 21) before trouble shooti ng in ot h er areas.
Ground Terminal
The ground terminal is conn ected to the frame of the g enerato r, the metal noncurrent carryin g parts of the generator,
and the ground terminals of each receptacle.
Before using the ground terminal, consult a qua lif ied electric ian, electrical in s pector, or loc al ag enc y having jurisdiction
for loca l codes or ordina nces that apply to the intended use of the generator.
Atte ntion ! It is comp ulsorily to make protective earthing before
operating the
generator. P ro tective earthing must correspon d to
Rules for Installing Electrical Facilities.
GROUND
TER M IN A L
Earthing devices and grounding conductors must be selected in accordance
with chapters 1.7 and 1.8 of Rules for I n s talling Electrical Facilities.
Usually, copper grounding conductor n eeded of min imum 4mm
² section.
Fuel Gauge
The fuel gauge is a mechanical device that measures the fuel level in the
tank. The red indicator in the window will reflect the level in relation
to full or empty. To p rovide increased o p erating time, start with a full
tank before beginning operation. Chec k the fuel level with the generator
on a level surface. Al ways refuel with the e ngine OFF and coo l.
9
EM P T Y FULL
Hour Meter
The hour meter indicates the hours the generator has been operated.
Use i t to determine when scheduled maintenance should be
Performed
.
Hour Meter
FUEL GAUG E
FUEL TAN K CA P