Owner's Manual
QUICK START GUIDE (PROPANE)
Remove shipping braces
The shipping braces prevent engine movement during 
shipment. Flip the generator over and remove the brightly 
colored brace between the motor and the frame.
1.
Turn breaker o
The breaker is located on the right side of the front power 
panel. Flip the breaker down to prevent accidental load 
when starting the generator.
3.
Connect propane hose
The propane inlet is located on the left hand front panel to 
the right of the fuel switch. Securely connect the propane 
hose to the inlet.
5.
Add oil
The oil ll cap is located on the lower engine block to the 
right of the recoil start housing. Remove the oil ll cap and 
ll with 10w30 oil.
2.
Turn fuel switch to Propane
The fuel switch is located on the left front panel. Rotate 
the switch counter-clockwise to the Propane position to 
turn on the fuel supply.
4.
12










