Technical data

Set-up
Operating manual H868 Version 00.0 - 07/201366
6.14.2 Setting the operating pressure
Figure 47: Setting the operating pressure
1. Pull the turning handle (1) up.
2. Set the operating pressure in such a way that the pressure
indicator (2) indicates 6 bar:
To increase the pressure: Turn the turning handle (1) clockwise.
To reduce the pressure: Turn the turning handle (1)
counterclockwise.
3. Push the turning handle (1) down.
Machine damage possible due to incorrect pressure.
An incorrect pressure can cause damage to the machine.
The operating pressure for the pneumatic unit is 6 bar.
Make sure that the operating pressure is set correctly before
putting the machine into operation.
ATTENTION
(1) - Rotary handle
(2) - Pressure indicator
0
2
8
4
6
10
1
2