Technical data

Set-up
Operating manual H868 Version 00.0 - 07/201354
6.8 Fitting the setpoint device
Figure 36: Fitting the setpoint device
1. Screw the angle (1) under the table plate.
2. Screw the setpoint device (2) onto the angle piece (1).
3. Pull the pedal rod (3) to the correct length:
10° inclination with pedal (4) released.
4. Attach the pedal rod (3).
10°
1
2
3
4
(1) - Angle piece
(2) - Setpoint device
(3) - Pedal rod
(4) - Pedal