Technical data

Operation

Operating manual H868 Version 00.0 - 07/2013 29

5.7 Setting the thread regulator

The thread regulator determines the tension applied to guide the

needle thread around the hook.

Correct setting:

The loop of the needle thread slides at low tension over the thickest

point of the hook.

Figure 15: Setting the thread regulator

1. Loosen the regulator screw (2).

2. To increase the tension: Slide the thread regulator (1) to the

right.

To reduce the tension: Slide the thread regulator (1) to the left.

3. Tighten the regulator screw (2).

Risk of injury by the needle point and moving

parts

Switch off the sewing machine before setting the

thread regulator.

WARNING

(1) - Thread regulator

(2) - Regulator screw