Technical data

Operation
Operating manual H868 Version 00.0 - 07/2013 19
5.3 Threading in the needle thread
Figure 4: Thread guide on the unwinding bracket and machine arm
1. Fit the thread reel on the thread reel holder (1).
2. Insert the thread from the rear to the front through a hole in
the guide.
Thread the unwinding bracket (2).
Damage to the hook point or needle possible
due to incorrect distance from the hook.
The distance between the hook and the needle
only needs to be adjusted if the new needle has
a different size.
After changing the needle size, adjust the hook
distance.
For more information see  Service manual.
WARNING
Risk of injury by the needle point and moving
parts
Switch off the sewing machine before inserting the
thread.
WARNING
2
1
(1) - Thread stand
(2) - Guide on the unwinding
bracket