Technical data

Safety instructions
Operating manual H868 Version 00.0 - 07/201312
Requirements to
be met by the
personnel
The machine may only be set up by qualified specialists.
Maintenance work and repairs may only be carried out by qualified
specialists.
Work on electrical equipment may only be carried out by qualified
specialists.
Only authorized persons may work on the machine. Every person
who works on the machine must have read the operating manual
first.
Operation Inspect the machine while in use for any externally visible damage.
Interrupt your work if you notice any changes to the machine.
Report any changes to your supervisor. A damaged machine may
not be used any more.
Safety
equipment
Safety equipment may not be removed or put out of service. If this
cannot be avoided for a repair operation, the safety equipment
must be refitted and put back into service immediately afterwards.
3.2 Signal words and symbols used in warnings
Warnings in the text are distinguished by color bars. The color
scheme is oriented towards the severity of the danger. Signal
words specify the severity of a danger:
Signal words Signal words and the endangerment that they describe:
Symbols In the case of dangers to personnel, the following symbols indicate
the type of hazard:
Signal word Endangerment
DANGER Resulting in death or serious injury.
WARNING Death or serious injury possible.
CAUTION Moderate to minor injuries possible.
ATTENTION Damage possible.
Symbol Type of danger
General danger