Technical information

© 2012 Dürkopp Adler AG
User settings
DACeco
8
3.2 Stop position of the needle
Select the function Stop position of the needle with S1. If the stop position is set to "Needle up", the
corresponding LED is lit.
Pressing the button changes the stop position of the needle.
The last setting is saved when switching of the control unit and is available at the next start.
3.3 Reducing the speed
The speed can be adjusted to the current sewing process with the potentiometer. The basis is the maximum
speed listed for the machine class; reduce the speed starting at that point.
The set value remains until the operator adjusts the potentiometer.
The last setting is saved when switching of the control unit and is available at the next start.