Operation Manual

2.3 Elements on the Frame
Elements Function
1 - Main switch - Turning the sewing unit on and off
2 - Air gun - Removing accumulations of lint from the sewing head, trimming
head and turntable
3- Knob - Setting the speed of the turntable
4 - Foot switch - Switching automatic operation on and off
5 - Foot switch - Opening the material clamp for intermediate airing, in order to align
the material more precisely
Maintenance Unit
6 - Air filter and - Before the water level reaches the filter, turn the screw 7 in far
water separator enough to drain water. The compressed air supply should
not be
interrupted.
8 - Pressure regulator with - To set at 5 bar pull the sleeve 9 up and turn appropriately
pressure gauge
10 - Blower pipe - Blowing cloth waste from the turntable
1
3
4
5
2
10
6
7
9
8
12