Operation Manual

Elements Function
6 - Blower pipe - Blowing the material in the cutting position
7 - Blower pipe - Blowing the warp in the cutting position
2.2.1 Elements at the Trimmer with Upper and Lower Knife
8/9 - Upper and lower knife - Trimming the material at the desired distance to the course of the seam
10 - Glide piece - Presses the shearing head sideways against the material support so
that the knives always lie parallel to the course of the seam
2.2.2 Elements at the Trimmer with Stamp and Template (Gloves)
11/12 - Stamp and Template - Trimming the material at the desired distance to the course of the seam
#
6
12
11
10 9 876
11