Operation Manual

4. Maintenance

Caution Risk of Injury!

Before cleaning the sewing unit turn the main switch off.

At the latest the maintenance work must be conducted after the

number of operating hours listed in the column "Hours".

Procedure Hours Remarks

Sewing head

Removal of lint accumulations 8

Check the oil level in the oilpan 40 If the oil, with the machine not running, drops

below the middle of the oil level gauge, top up

with "Esso-SP-NK10"-type oil.

(See Mechanic’s Instructions)

Check the oil feed

at the viewing glass 40 Check with the machine running

Check the timing belts 500 Condition and Tension to be checked by a

mechanic

Check V-belt tension 500 Condition and tension to be checked by a

mechanic

Trimming head

Removal of lint accumulations 8

Check the oil level in the reservoir 8

Check the oil level in the plastic reservoir

of the shearing head 8 There must always be oil in the reservoir.

Top up with "Esso SP-NK 10"-type oil

Check the oil feed to the head 500 Have a mechanic check this

Test the V-belt tension 40 Have a mechanic check this

urntable and clamp

Check the condition of the Delrin 40

Lubricate the planet wheel 40 Have a mechanic conduct this

Pneumatic System

Clean the filter insert in the filter 500 First close the lock valve and vent the

system. (See Service Instructions)

Test the pneumatic system for

"air-tightness" 500