Operation Manual

3.7.2 Slewing the Trimming Head In and Out

For service or maintenance work the trimming head can be swung out.

Caution Risk of Injury!

Before slewing the trimming head in or out turn the main switch off.

1. Swinging the trimmer out

–

Pull the magnetic roller shaft 1 all the way down

–

Swing the trimmer to the side

–

Release the magnetic roller shaft

2. Swinging the trimmer in

–

Pull the magnetic roller shaft all the way down

–

Turn the guide piece 2 clockwise against the force of the

counterweight

–

Swing the trimmer into the turntable.

Take care, that:

The guide piece 2 must touch the material support under pressure.

The switching flag 3 must be in front of the magnetic roller.

–

Press the magnetic roller shaft 1 up.