Operation Manual

3.7 Diverse Procedures

3.7.1 Slewing the Sewing Head In and Out

For threading the hook thread, service or maintenance work, the

sewing head can be swung out.

Caution Risk of Injury!

Before swinging the sewing head out or in turn the main switch off.

1. Swinging the sewing head out

–

Bring the needle into the "high position".

For this turn the handwheel counter to the run direction until the

needle is out of the material.

–

Pull the magnetic roller shaft 1 all the way down

–

Swing the sewing head out to the side

–

Release the magnetic roller shaft.

2. Swinging the sewing head in

–

Pull the magnetic roller shaft 1 all the way down

–

Turn the needle hole mushroom 2 clockwise against the spring

pressure

–

Swing the sewing head into the turntable.

Take c are, th at

- the side 3 of the needle hole mushroom 2 lays onto the material

support under pressure.

- the switching flag 4 is behind the magnetic roller

–

Press the magnetic roller shaft up.