Operation Manual

2.4 Elements at the Controls/ Control Panel

Element Function

Controls

1 - Display - Displaying the program number, piece count, error messages

2 - Switch - Selecting the desired program

3 - Keys - Keys without function

4 - Key - Testing the stacker

5 - Key - Setting the piece counter

6 - Key - Setting the piece count "+"

7 - Key - Setting the piece count "-"

8 - Stop key - Interrupting the function sequence,

activating the selected program with the main switch turned on

Control Panel

9 - Motor protection switch - By overload or short circuit, turns off the whole sewing unit

10 - Fuse F1 - By a short circuit in the controls, interrupts the transformer circuit

11 - Fuse F2 - By a short circuit in the magnet winding, interrupts the effected circuit

47685

321

9 10 11