Operation Manual

3.6.6 Automatic Operation

Caution Risk of Injury!

During automatic operation do not reach into the area of the

turntable or the sewing /trimming heads.

1. Operation of the right foot pedal

–

The sewing head is turned on

–

The trimming head is turned on

–

The turntable is turned on when the trimming head and sewing

head have run onto the switch.

The turntable turns counterclockwise.

2. The turntable operates switch b19 (loading position)

–

The turntable is turned off

–

The clamp in feed position is opened after a delay.

The clamp can be fed.

3. The clamp with material is opened

–

The gripper 1 runs to the material holder.

4. Stacking procedure

–

The gripper 1 pulls the material onto the catcher 2

–

The catcher lowers with the material

–

The gripper runs up

–

The catcher runs to the back. During this movement the material is

"stripped off" and thus moved into the magazine 3.

–

The catcher runs up and forward into its initial position.

5. Stopping and starting the sewing cycle

The trimming head reaches the initiator b22 and switches the trimmer

off.

The sewing head reaches the initiator b21 and starts the turntable.

b19

b22

b21