Operation Manual

3.4 Remedying Thread Breakage

At the sewing head there are two thread monitors, whose switching

flags are freed when the needle or hook thread breaks. In this case

automatic operation is stopped and the display of the control panel

indicates the thread breakage.

Caution Risk of Injury!

Before threading turn the main switch off.

–

Bring the needle rod into the high position by turning the handwheel

By hook thread breakage

–

Swing out the sewing head. For this pull the magnetic roller shaft

down. (See also subject 3.7.1)

–

Thread the thread (See subject 3.2)

–

Swing the sewing head in again.

Here take care that the needle hole mushroom 1 is in the position

shown in the illustration and that its left side is pressed against the

material support.

–

Sew 2 - 3 tying stitches

For this first hold the needle and hook threads fast and turn the

handwheel accordingly.

–

Turn on the machine