Operation Manual

About these operating instructions
Operating Instructions 971 Version 00.0 - 03/2014
5
1.4 Other documents
The device contains built-in components from other manufacturers. The
respective manufacturers have carried out hazard assessments for these
purchased parts and confirmed compliance of the design with the applicable
European and national regulations. The intended use of the built-in
components is described in the corresponding manuals of the manufacturers.
1.5 Liability
All information and notes in these operating instructions have been
compiled in accordance with the latest technology and the applicable
standards and regulations.
The manufacturer cannot be held liable for any damage due to:
• Damage during transport
• Failure to observe the operating instructions
• Improper use
• Unauthorized modifications to the machine
• The deployment of untrained personnel
• Using unapproved spare parts
1.5.1 Transportation
Dürkopp Adler cannot be held liable for any damage during transport.
Check the delivered product immediately after receiving it. Report any
damage to the last transport manager. This also applies if the packaging
is not damaged.
Keep the machines, devices and packaging material in the condition they
were at the time when the damage was identified. This secures any claims
against the transport company.
Report all other complaints to Dürkopp Adler immediately after receiving
the product.
1.5.2 Intended use
The Dürkopp Adler 971-01 is for sewing very light to moderately heavy
material.
The machine is only intended for processing dry sewing material. The
material must contain no hard objects.
The seam is generally created with sewing threads made of textile fibers
of sizes 80/2 Nm (synthetic) or 140/3 Nm (core spun thread). If other
threads are to be used, the resultant risks must be assessed beforehand
and corresponding safety measures taken.
The sewing machine is intended for industrial use.
The machine may only be set up and operated in dry conditions on well-
maintained premises. If the machine is operated on premises that are not
dry and well-maintained, then further measures may be required which