Operation Manual

About these operating instructions
4
Operating Instructions 971 Version 00.0 - 03/2014
Faults
Indicates faults that can occur due to an incorrect setting.
Steps to be performed when operating the machine (sewing and
equipping)
Steps to be performed for servicing, maintenance and installation
Steps to be performed via the software control panel
The individual steps are numbered:
First step
Second step
The sequence of the steps must always be followed.
Lists are identified by bullet points.
Result of performing an operation
Change to the machine or in the display.
Important
Special attention must be paid to this point when performing a step.
Information
Additional information, e.g. on alternative operating possibilities.
Sequence
Specifies the work to be performed before or after a setting.
Reference
 A reference is provided to another place in the text.
Safety Important warnings for the user of the machine are specifically marked.
Because safety constitutes an area of major importance, hazard symbols,
levels of risk, and their signal words are described separately in
 3 Safety instructions.
Location
information
Information on where something is positioned using the terms "right"
or "left" must always be regarded from the operator's point of view if the
figure gives no other obvious indication for determining the location.
1.
2.
...
•
