Operation Manual

Starting up for the first time
Operating Instructions 971 Version 00.0 - 03/2014
47
7 Starting up for the first time
Test run
First perform a test run using the sewing material in order to test that
the unit is working properly.
Starting sewing for the first time
1. Start and stop the automatic sequence if a material holder is in front
of the sewing head.
2. Thread the needle and hook threads.
3. Place the sewing material in the clamp at the sewing head; to do this,
press down manually on the opening lever.
4. Sew the first stitches manually.
5. Insert the sewing material into the next clamp.
6. Start automatic sequence.