Operation Manual

Set-up
Operating Instructions 971 Version 00.0 - 03/2014
45
Fig. 27: Setting the motor circuit breaker
6.8.2 Checking the direction of rotation
To check the direction of rotation:
1. Switch on the main switch.
2. Switch the automatic sequence on and off again using the right foot pedal.
3. The turntable must turn counterclockwise.
4. If the direction of rotation is NOT correct, two phases in the connecting
plug must be interchanged.
6.9 Pneumatic connection
(1) - Motor circuit breaker
཰
The following instructions must be observed
to ensure proper operation of the pneumatic
control processes.
The compressed air supply must be designed such
that even at times of maximum air consumption,
the supply pressure never drops below the
minimum operating pressure of 5 bar.
WARNING