Operation Manual

Operation
Operating Instructions 971 Version 00.0 - 03/2014
37
Check the oil level at the sewing head
1. Check the oil level on the inspection glass (1) of the sewing head.
2. If the oil can be seen at the lower edge, the oil level is correct.
3. If no oil is to be seen, top up oil.
Fig. 20: Inspection glass on the sewing head
Topping up oil at the sewing head
1. Unscrew the inspection glass (2).
2. Raise the inspection glass (2) a little.
3. Top up oil - watching the inspection glass (1) continuously.
4. Only top up oil until it is just visible on the inspection glass (1).
Fig. 21: Topping up oil at the sewing head
(1) - Inspection glass
཰
(2) - Inspection glass
ཱ