Operation Manual

Operation
Operating Instructions 971 Version 00.0 - 03/2014
35
A clean sewing unit provides protection from faults.
Clean and maintain the areas listed below after the time specified in the
table at the latest.
Process Hours Comments
Sewing head
Removing lint accumulations
8
Check toothed belt 500 Have a mechanic check the
condition and tension
Check V-belt tension 500 Have a mechanic check the
condition and tension
Cutting head
Removing lint accumulations
8
Check the V-belt tension 40 Have this checked by a mechanic
Turntable and clamps
Check the condition of the plastic plate
40
Lubricate the planet wheel 40 Have this done by a mechanic
Pneumatic system
Clean the filter element in the filter
500 Close the shut-off valve first and
bleed the system,
 Service
Instructions.
Check the "leak tightness"
of the pneumatic system
500
Risk of injury due to flying particles.
Cleaning with compressed air can cause injuries
to the eyes or respiratory organs.
NEVER blow particles towards other persons.
WARNING