Operation Manual

Operation
Operating Instructions 971 Version 00.0 - 03/2014
33
5.7.2 Swinging the cutting head in or out
The cutting head can be swung out for service and maintenance works.
Fig. 19: Swinging the cutting head in or out
Swinging the
cutting head out
To swing the cutter out:
1. Pull the magnetic roller shaft (1) downwards completely.
2. Switch the cutter out to the side.
3. Release the magnetic roller shaft (1).
Caution: Risk of injury!
Switch off the main switch before swinging the
cutting head in or out.
WARNING
(1) - Magnetic roller shaft
(2) - Guide piece
(3) - Switching flag
཰ཱ
ི