Operation Manual

Operation
Operating Instructions 971 Version 00.0 - 03/2014
31
3. Clamp with sewing material is opened.
 The looper (2) moves to the material holder.
Stacker process 4. The looper (2) pulls the material onto the rack (3).
5. The rack (3) lowers with the sewing material.
6. The looper (2) moves upwards.
 The rack (3) moves backwards. With this movement, the material
is removed and thus conveyed into the magazine (4).
7. The rack (3) moves upwards and to the front into its starting position.
Stopping/starting
the sewing cycle
8. The cutting head reaches the initiator S4 (6).
 The cutter switches off.
9. The sewing head reaches the initiator S3 (5).
 The turntable starts.
5.7 Various processes
5.7.1 Swinging the sewing head in and out
The sewing head can be swung out in order to thread the looper thread
and for service and maintenance works.
Caution: Risk of injury!
Switch off the main switch before swinging
the sewing head in and out.
WARNING