Operation Manual

Operation

Operating Instructions 971 Version 00.0 - 03/2014

4. Swing the sewing head back in. When doing so, ensure that the throat

plate insert (1) is in the position shown in the figure and that its left side

is pressed firmly against the fabric support surface.

5. Sew 2 - 3 securing stitches. To do this, first hold the needle and looper

threads securely and turn the hand wheel accordingly.

6. Switch on the machine and start the normal sewing sequence.

5.5 Setting the sewing foot height

Fig. 12: Sewing foot height

To set the needle foot height:

1. Using the hand wheel, bring the sewing foot into the lowest position.

2. Turn the adjusting wheel (1) until the sewing foot is gently touching the

sewing material.

Caution: Risk of injury!

Switch off the main switch before making settings.

WARNING

(1) - Adjusting wheel