Operation Manual

Operation
Operating Instructions 971 Version 00.0 - 03/2014
23
5 Operation
5.1 Threading the needle thread
Fig. 9: Threading
To thread the needle thread:
1. Place the spool of thread on the thread reel holder.
2. Guide the thread alternately through the guide eyelets of the take-up arm.
3. Feed the thread through the thread tensioner (3) and thread guides (2).
4. Guide the thread through the thread lever (1) and the preliminary
tensioner, via the finger of the needle thread monitor, through the eyelet
on the needle bar and through the needle.
Caution: Risk of injury!
Switch off the main switch before threading.
WARNING
(1) - Thread lever
(2) - Thread guides
(3) - Thread tensioner
཰
ཱི