Operation Manual

Device description
Operating Instructions 971 Version 00.0 - 03/2014
17
4.2 Elements on the cutting head
Fig. 3: Cutting head
Fig. 4: Cutting head
Number Designation Function
1 Oil pot Lubricates all the moving parts in the head.
2 Motor Drives the cutter and the magnetic roller.
3 Weight Presses sliding block 5 of the shearing head sideways
into the fabric support surface, so that the knife is always
parallel to the seam contour.
4 Oil reservoir Supplies top blade holder and the rotating parts with oil.
The reservoir must always be filled with oil. If required,
top up oil with grade DA-10.
5 Sliding block Using the sliding block ensures the correct parallelism
of the blade with the seam contour.