Operation Manual

Installation
94 Operating manual 969 - 00.0 - 08/2014
7.6 Assembling thread reel holder
Fig. 52: Assembling thread reel holder
1. Use the screws (5) included in the machine accessories. to
fasten the thread reel holders (3) to the machine upper
section (6).
2. After loosening the screws (2) the thread reel holder arm (1)
can be tilted for operating the machine.
The thread reel holder arm (1) can also be slid into a lower
position and screw tight in the holes (4).
(1) - Thread reel holder arm
(2) - Thread reel holder arm screws
(3) - Thread reel holder
(4) - Holes in thread reel holder
(5) - Thread reel holder screws
(6) - Machine upper section
①
③
④
⑤
②
⑥