Operation Manual

Installation
Operating manual 969 - 00.0 - 08/2014 93
1. Remove the plug from the top of the upper machine section
(2) and screw in the eyebolt (1) included in the machine
accessories.
2. Lift the machine upper section with a crane and, from below,
screw on the hose with the end piece (8) and the fabric washer
(9) included in the machine accessories.
3. Lower the machine upper section (2) onto the table plate (3)
and fasten using the screws (4) included in the machine
accessories.
4. Screw on the reservoir holder (5)
5. Screw on the used oil reservoir (6).
6. Slide in the front frame bar plate (7) at an angle and screw in
place.
WARNING
Risk of injury.
The eyebolt is only designed for lifting the machine
head. Lifting the entire machine including the frame
via this eyebolt is not permitted.