Operation Manual

About this manual
6 Operating manual 969 - 00.0 - 08/2014
1.5.2 Proper use
The Dürkopp Adler 969 machine is intended for sewing heavy to
very heavy material (max. material thickness is 20 mm). Heavy
and very heavy material require a needle strength of 120-280 Nm.
The machine is intended only for use with dry material. The
material must not contain any hard objects.
The stitching is produced using core spun threads, polyester
fibers, or cotton threads.
The sewing machine is intended for industrial use.
The machine may only be set up and operated in dry conditions
in well-maintained premises. If you operate the machine in rooms
that are not dry and are not maintained then additional measures
as per the EN 60204-31:1999 standard may need to be taken.
Only authorized/trained personnel may operate the machine.
The manufacturer cannot be held liable for damages resulting from
improper use.
WARNING
Risk of electric shock, crushing and punctures!
Improper use can result in injury.
Be sure to observe all instructions in the manual.
ATTENTION
Improper use can result in material damage.
Be sure to observe all instructions in the manual.