Operation Manual

Maintenance
Operating manual 969 - 00.0 - 08/2014 71
Fig. 37: Areas requiring special attention when cleaning- Part 2
Areas particularly susceptible to soiling:
• Winder cutter (7)
• Area between needle plate and feed dogs (3)
• Hook (4)
• Cutters (2), (5)
• Area around the needle (1)
Cleaning steps:
1. Shut off power by turning off power switch.
2. Unscrew needle plate.
3. Remove the covers (5) and (6) so that dust and thread
remnants can fall out of the normally covered openings.
4. Remove any lint and thread remnants using a compressed-air
pistol or a brush.
(7) - Winder cutter
⑦
ATTENTION
Damage to the paintwork due to solvent-based cleaners.
Solvent-based cleaners will damage paintwork on the
machine.
Only use solvent-free substances when cleaning the
machine.