Operation Manual

Operation
Operating manual 969 - 00.0 - 08/2014 57
Manual seam bar tacking:
1. Move stitch adjusting wheel (5) to the bottom.
 The machine feeds the material in reverse as long as the
adjusting wheel is depressed.
Partially depressing the stitch adjustment lever (5) shortens the
stitch length in proportion to the distance of the adjustment lever
from its middle position.
In middle position, feed is stopped completely.
In the lower end position, the machine sews in reverse with the
stitch length currently set at the adjusting wheels.
Automatic seam bar tacking:
Only Classic machines come with semi-automatic and automatic
seam bar tacking. If desired, Eco machines can also be retrofitted.
Semi-automatic seam bar tacking:
1. Press key (1) on the machine keypad.
 The machine feeds the material in reverse as long as the key
is depressed.
Semi-automatic seam bar tacking with foot switch
1. Press foot switch (3) forward with toes.
 The machine feeds the material in reverse as long as the
foot switch is depressed.
Automatic seam bar tacking:
The machine's electronic control unit allows automatic seam bar
tacking to be activated.
To do this, read the  Operating manual for the DAC basic/
classic control system.