Operation Manual

Operation
56 Operating manual 969 - 00.0 - 08/2014
Switching stitch length:
Stitch length can be switched between the values set on the
adjusting wheels (3) and (4) while the machine is stopped or
running.
1. Press the key (1).
 Stitch length switches from the current length to the second
length and the key illuminates/turns off. If the key illuminates,
the longer stitch length set on the top adjusting wheel (4) is
used.
5.13.3 Reverse sewing and seam bar tacking
On Eco machines, seam bar tacking can only be done by hand.
If desired, Eco machines can be retrofitted with an automatic bar
tacker. In all cases the seam bartacking can be activated when
the machine is stopped and also when the machine is running.
Fig. 29: Operating the seam bar tacker
①
②
③
④
⑤
(1) – Seam bar tacker key on keypad
(2) - OP1000 control panel
(3) - Foot switch
(4) - Operating pedal
(5) - Stitch adjustment lever