Operation Manual

Operation

48 Operating manual 969 - 00.0 - 08/2014

Fig. 24: Setting presser foot pressure

To increase presser foot pressure:

1. Release the counternut (2).

2. Turn adjusting wheel (1) to the right until the desired pressure

is reached.

3. If the pressure is insufficient even when the adjusting wheel

is fully tightened, use the auxiliary spring (3) provided in the

machine accessories.

4. Completely unscrew adjusting wheel (1).

(1) - Adjusting screw

(2) - Counternut

(3) - Auxiliary spring

①

②

③

WARNING

Risk to injury to eyes.

Loosening the adjusting wheel too much can

cause it to unscrew and be shot off by the spring

underneath.

Always loosen with the presser foot lowered (less

spring tension).

Loosen the screw with one hand, pressing down

with the other to prevent it from coming off.