Operation Manual

Installation
98 Operating manual 969 - 00.0 - 08/2014
7.8.2 Setting operating pressure
Correct setting
The operating pressure of the pneumatic system is 6 bar.
Fig. 54: Setting operating pressure
1. Pull the adjustment knob (1) up.
2. Set the operating pressure so the pressure indicator (2) shows
6bar:
• To increase pressure: Turn the adjustment knob (1)
clockwise.
• To reduce pressure: Turn the adjustment knob (1)
counterclockwise.
3. Push the adjustment knob (1) down.
ATTENTION
Machine damage possible due to incorrect pressure.
Incorrect pressure can result in damage to the machine.
Make sure the operating pressure is set correctly before
starting the machine.
0
2
8
4
6
10
(1) - Adjustment knob
(2) - Pressure gage
①
②