Operation Manual

Installation
Operating manual 969 - 00.0 - 08/2014 95
7.7 Electrical connection
7.7.1 Checking mains voltage
Important: The voltage on the type plate of the sewing drive must
correspond to the mains voltage.
1. Check mains voltage before connecting the machine.
7.7.2 Connecting the lighting
Connecting the transformer to the control unit
DANGER
Risk of death from electric shock.
The machine should only be connected to power by
qualified electricians.
Disconnect the power plug before carrying out work
on the electrical equipment.
Make sure the power plug is not accidentally
plugged back in.
The voltage on the type plate of the sewing drive
must correspond to the mains voltage.
DANGER
Risk of death from electric shock.
Supply voltage for the sewing lamp remains on
even if the sewing machine is turned off through the
power switch.
Unplug the sewing machine before assembling and
connecting the sewing lamp to the transformer.
Make sure the power plug is not accidentally
plugged back in.