Operation Manual

Installation
84 Operating manual 969 - 00.0 - 08/2014
4. Connect the lugs on the ends of the connecting rod (4) to the
ball pins on the sensor (3) and pedal (5).
7.4.4 Setting frame height and pedal position
The frame can be adjusted continuously to any height between
770 and 910 mm.
Fig. 46: Setting frame height and pedal position
WARNING
Risk of occupational illness (musculoskeletal
damage) to operating personnel from failure to
comply with ergonomic requirements.
Adjust the frame height to the height of the person
operating the machine.
Position the pedal so that the middle of the pedal
lies in the axis of the needle with a maximum
deviation of 15 mm.
(1) - Table plate
(2) - Frame height adjustment screws
(3) - Pedal
(4) - Pedal connecting rod couplings
①
②
④
③