Operation Manual

About this manual
Operating manual 969 - 00.0 - 08/2014 5
Orientation If an illustration does not provide any explicit orientation infor-
mation then "right" or "left" are always with respect to the position
of the operator.
1.4 Other documents
This equipment includes components from other manufacturers.
Each manufacturer has performed a hazard assessment for these
purchased parts and confirmed their design compliance with appli-
cable European and national regulations. The proper use of these
components is described in each manufacturer's manual.
1.5 Liability
All information in this operating manual has been compiled with
consideration to the state of the art, and applicable standards and
regulations.
The manufacturer cannot be held liable for damages resulting
from:
• Breakage or other damage occurring during transport
• Failure to observe the operating manual
• Improper use
• Unauthorized modifications to the machine
• Use of untrained personnel
• Use of unapproved replacement parts
1.5.1 Transport
Dürkopp Adler cannot be held liable for breakage and transport
damages. Inspect the delivery immediately upon receiving it.
Report any damage to the last transport manager. This applies
even if the packaging is undamaged.
Leave machines, equipment and packaging material in the
condition in which they were found when the damage was
discovered. This will ensure any claims against the transport
company.
Report all other complains to Dürkopp Adler immediately after
receiving the product.